Exothermic properties of plaster–synthetic composite casts

Purpose

Plaster casts can cause burns. Synthetic casts do not. Composite plaster–synthetic casts have not been thoroughly evaluated. This study analyzed the temperature from plaster casts compared with composite casts in a variety of in vitro conditions that would simulate clinical practice.

Methods

A Pyrex cylinder filled with constant body temperature circulating water simulated a human extremity. Circumferential casts, of either plaster or composite construction (plaster inner layer with outer synthetic layer), were applied to the model. Peak temperatures generated by the exothermic reactions were studied relative to the following variables: dip water temperature (24 °C versus 40 °C), cast thickness (16, 30, and 34 ply), and delayed (5-min) versus immediate application of the synthetic outer layers. Peak temperatures from the all-plaster casts were compared with the composite casts of the same thickness. Finally, the relative cast strength was determined.

Results

Potentially dangerous high temperatures were measured only when 40 °C dip water was used or when thick (30- or 34-ply) casts were made. Cast strength increased with increasing cast thickness. However, the presence of synthetics in the composite casts layers did not increase cast strength in every case.

Conclusion

When applying composite casts, the outer synthetic layers should be applied several minutes after the plaster to minimize temperature rise. Composite casts do not routinely generate peak temperatures higher than plaster casts of similar thickness. Because the skin of children and the elderly is more temperature-sensitive than average adult skin, extra care should be taken to limit the exothermic reaction when casting children and the elderly: clean, room temperature dip water, minimal required cast thickness, avoidance of insulating pillows/blankets while the cast is drying.     

Customized,degradable, functionally graded scaffold for potential treatment of early stage osteonecrosis of the femoral head

Osteonecrosis of the femoral head (ONFH) is a debilitating disease that results in progressive collapse of the femoral head and subsequent degenerative arthritis. Few treatments provide both sufficient mechanical support and biological cues for regeneration of bone and vascularity when the femoral head is still round and therefore salvageable. We designed and 3D printed a functionally graded scaffold (FGS) made of polycaprolactone (PCL) and β‐tricalcium phosphate (β‐TCP) with spatially controlled porosity, degradation, and mechanical strength properties to reconstruct necrotic bone tissue in the femoral head. The FGS was designed to have low porosity segments (15% in proximal and distal segments) and a high porosity segment (60% in middle segment) according to the desired mechanical and osteoconductive properties at each specific site after implantation into the femoral head. The FGS was inserted into a bone tunnel drilled in rabbit femoral neck and head, and at 8 weeks after implantation, the tissue formation as well as scaffold degradation was analyzed. Micro‐CT analysis demonstrated that the FGS‐filled group had a significantly higher bone ingrowth ratio compared to the empty‐tunnel group, and the difference was higher at the distal low porosity segments. The in vivo degradation rate of the scaffold was higher in the proximal and distal segments than in the middle segment. Histological analysis of both non‐decalcified and calcified samples clearly indicated new bone ingrowth and bone marrow‐containing bone formation across the FGS. A 3D printed PCL‐β‐TCP FGS appears to be a promising customized resorbable load‐bearing implant for treatment of early stage ONFH. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:1002–1011, 2018.

     

Analysis of the factors causing tight cast syndrome after closed reduction and casting of pediatric distal radius fractures

Objective

The aim of this study was to evaluate the most important factors which can cause “tight cast syndrome’’ (TCS) in pediatric patients with distal radius fractures.

Advanced conservative treatment of complete acute rupture of the lateral ankle ligaments: Verifying by stabilometry

Background

The aim of this study was to investigate the result of the specific conservative treatment of acute lateral ankle ligaments rupture and verify the effect of this therapy by stabilometry.

Are Ceramic Bearings Becoming Cost-Effective for All Patients?

Background

The purpose of this study is to analyze whether the cost for ceramic-on-polyethylene (C-PE) and ceramic-on-ceramic (COC) bearings used in primary total hip arthroplasty (THA) was changing over time, and if the cost differential between ceramic bearings and metal-on-polyethylene (M-PE) bearings was approaching the previously published tipping point for cost-effectiveness of $325.

Wear Rates With Large Metal and Ceramic Heads on a Second Generation Highly Cross-Linked Polyethylene at Mean 6-Year Follow-Up

Background

Bearing surface wear and osteolysis are major factors limiting the durability of total hip arthroplasty (THA). Second generation annealed highly cross-linked polyethylene (HXLPE) and ceramics were introduced to THA for their excellent wear rates. However, there is little data comparing the wear rates of metal and ceramic heads on second generation HXLPE.

Ceramic on ceramic hip arthroplasty in fused hips

Background:Most literature in the field of total hip arthroplasty (THA) for fused hips, until date has reported the results of using metal on polyethylene and ceramic on polyethylene bearings. Results of THA using ceramic on ceramic (CoC) bearings in fused hips have not been published in literature. This study reports the results of cementless THA using CoC articulation perfomed in fused hips.Results:Mean Harris hip score improved from 42.4 to 84.2 and mean leg lengthening of 36.6 mm was achieved. In the average 5.4 years (range 2.8-9.1 years) followup there were no cases with osteolysis around acetabular cup and femoral stem. In this study, there was no case of ceramic fracture. There was one case of squeaking.Conclusion:This study suggests that cementless THA performed for fused hips with CoC bearings can provide good early clinical results.     

Outcome of humeral shaft fractures treated by functional cast brace

Background:Functional brace application for isolated humeral shaft fracture persistently yields good results. Nonunion though uncommon involves usually the proximal third shaft fractures. Instead of polyethylene bivalve functional brace four plaster sleeves wrapped and molded with little more proximal extension expected to prevent nonunion of proximal third fractures. Periodic compressibility of the cast is likely to yield a better result. This can be applied on the 1^st day of the presentation as an outpatient basis. Comprehensive objective scoring system befitting for fracture humeral shaft is a need.Results:The results were assessed using 100 point scoring system where union allotted 30 points and 60 points allotted for angulations (10), elbow motion (10), shoulder abduction (10), shortening (5), rotation (5), absence of infection (10), absence of nerve palsy during treatment (10). Remaining 10 points were allotted for five items with two points each. They were the absence of skin sore, absence of vascular problem, absence of reflex sympathetic dystrophy (RSD), recovery of paralyzed nerve during injury and recovery of paralyzed nerve during treatment. Results were considered excellent with 90 and above, good with 80–89, fair with 70–79 and poor below 70 point. Results at 6 months were excellent in 43.94% (n = 29), good in 42.42% (n = 28), fair in 9.1% (n = 6), poor in 4.55% (n = 3). Union took place in 98.48% (n = 65) with an average of 10.3 weeks (range 6–16 weeks). 87.5% (n = 7) paralyzed radial nerve recovered. All wounds healed. Four patients had transient skin problem. One patient with mid shaft fracture had nonunion due to the muscle interposition.Conclusion:Modified functional cast brace is one of the options in treatment for humeral shaft fractures as it can be applied on the 1^st day of the presentation in most of the situations. Simple objective scoring system was useful particularly in uneducated patients.     

Cast index in predicting outcome of proximal pediatric forearm fractures

Background:Many pediatric forearm fractures can be treated in plaster following closed reduction. The cast index (CI, a ratio of anteroposterior to lateral internal diameters of the cast at the fracture site) is a simple, reliable marker of quality of molding and a CI of >0.8 correlates with increased risk of redisplacement. Previously, CI has been applied to all forearm fractures. We hypothesize that an acceptable CI is more difficult to achieve and does not predict outcome in fractures of the proximal forearm.Results:The mean CI was 0.77. Remanipulation was required in five cases (6%), all distal half fractures – mean CI 0.79. CI was higher in proximal half forearm fractures (0.83 vs. 0.76, P = 0.006), nonetheless these fractures did not re-displace more than distal fractures.Conclusion:Cast index is useful in predicting redisplacement of manipulated distal forearm fractures. We found that in proximal half forearm fractures it is difficult to achieve a CI of <0.8, but increased CI does not predict loss of position in these fractures. We therefore discourage the use of CI in proximal half forearm fractures.     

Incidence of Ceramic Fracture in Contemporary Ceramic-on-Ceramic Total Hip Arthroplasty: A Meta-analysis of Proportions

BackgroundWe performed a proportion meta-analysis of currently available data to determine the prevalence of ceramic fracture for each generation.MethodsA total of 10,571 total hip arthroplasties from 45 studies were included. Proportion meta-analysis with a random-effects model was performed to estimate the prevalence of ceramic fracture. To determine whether the ceramic fractures have a fatigue nature and a risk or latent period for the development, postoperative time lapse, patient age, and body mass index were related with ceramic fracture by metaregression analysis.ResultsAs of postoperative 2.0 to 18.8 years, the rate of ceramic fracture was 0.5% (95% CI, 0.3%-0.8%) in the forte group and 0.2% (95% CI, 0.1%-0.4%) in the delta group (P = .059). The ceramic fracture rate for each component was 0.2% (95% CI, 0.1%-0.3%) for the forte head, 0.1% (95% CI, 0.0%-0.2%) for the delta head (P = .210), 0.2% (95% CI, 0.1%-0.3%) for the forte liner, and 0.2% (95% CI, 0.1%-0.4%) for the delta liner (P = .305). The rate of ceramic fracture per 1000 patient-years was 0.9 (95% CI, 0.5-0.13) in the forte group and 0.5 (95% CI, 0.2-0.8) in the delta group (P = .072). In metaregression analysis, no significant associations were found between prevalence of ceramic fracture and postoperative time lapse, patient age, or body mass index.ConclusionsThe rate of ceramic fracture was 0.9/1000 patient-year in the forte group and 0.5/1000 patient-year in the delta group. The results of this study provide baseline data for further studies validating ceramic bearings.Level of EvidenceLevel I, meta-analysis.